Idaho · Climate zone 5–6
Custom House Plans in Idaho Falls, ID
Building requirements, permits and zoning in Idaho Falls, plus custom plans drawn to meet them. Customization is free and delivery starts at 24 hours.
Start my Idaho Falls designBuilding requirements
Building a house in Idaho Falls, ID: what the code requires
Statewide residential code
- Building code
- Idaho adopts the IRC statewide, but local jurisdictions enforce it and some rural areas have no inspections.
- Energy code
- Idaho Residential Energy Code (IECC-based with amendments) applies statewide.
- Climate zone
- IECC climate zone 5–6. Insulation, windows and HVAC are sized to match.
- Typical frost depth
- 24–36 in. Footings must extend below the local frost line (confirm with your building department).
- Foundations
- Full or walkout basements are common thanks to deep frost lines.
- Who can draw the plans
- Single-family homes can generally be designed by a non-licensed home designer. A licensed engineer's stamp is often required for structural items, engineered foundations or special hazard zones, or when the local building official asks for it.
- Engineer stamp
- If your jurisdiction requires sealed drawings, add our Idaho Engineer Stamp / Permit-Ready package ($1,000).
Idaho-specific rules & hazards
- Northern Idaho has high snow loads, and some areas face wildfire risk.
- Heavy roof snow loads and steeper, well-braced roof framing
- Wildfire-resistant materials and defensible-space detailing
- Seismic bracing, shear walls and hold-downs
Summary for planning only. Codes, editions and local amendments change, so always confirm current requirements with the building department that will issue your permit. Our designers check your jurisdiction before drawing.
Towns, villages & rural counties
Permit checklist for building in Idaho Falls and surrounding towns
Requirements differ town by town. Use this checklist with your local building, zoning and health departments, and include what you learn in your design instructions. We'll draw to it.
- 01Find who issues permitsIncorporated towns and cities usually have a building department. In unincorporated areas it's the county building or planning office, or a state agency, or in some rural areas nobody. Call before you buy the lot.
- 02Zoning & setbacksCheck the zoning district for minimum lot size, front, side and rear setbacks, maximum height, lot coverage and whether barndominiums, ADUs or metal buildings are allowed.
- 03HOA & deed restrictionsSubdivisions often restrict minimum square footage, exterior materials, roof pitch, garage orientation and outbuildings. These can be stricter than the town code.
- 04Septic & well permitsWithout city sewer or water, you'll need a percolation (perc) test and a septic permit from the county health department, plus a well permit.
- 05Driveway & culvert permitConnecting to a public road usually needs a driveway or culvert permit from the town, county or state DOT.
- 06Floodplain development permitIf any part of the lot is in a FEMA flood zone, you'll need a floodplain permit and an elevation certificate, and the lowest floor must be at or above the Base Flood Elevation plus any local freeboard.
- 07Energy code complianceMost jurisdictions require an energy compliance report (REScheck or similar) showing insulation, windows and HVAC meet the adopted energy code.
- 08Engineering stampMany building officials require a licensed engineer's seal for foundations, beams, trusses, or high wind, snow or seismic zones. Add our Engineer Stamp option at checkout.
- 09Utility & fire accessRural lots may need a fire-apparatus access road, a water supply for firefighting, or wildfire (WUI) defensible-space and ignition-resistant materials.
- 10Inspections scheduleA typical sequence is footing, foundation, framing, rough MEP, insulation and final. A certificate of occupancy is issued after final inspection.
Popular styles around Idaho Falls
Modern Farmhouse Plans in Idaho
Board-and-batten siding, black windows, metal roof accents and a deep front porch.
Barndominium Plans in Idaho
Metal-clad shell, soaring ceilings, a huge shop and very flexible interiors.
Cabin & A-Frame Plans in Idaho
Timber, steep A-frames and big windows made for mountain or lake lots.
Idaho Falls building FAQ
Do I need a building permit to build a house in Idaho Falls?+
Yes. New homes in Idaho Falls require a building permit from the local building department (city, or county if the lot is unincorporated). Expect to submit a full plan set, a site plan, energy compliance and, where required, sealed engineering.
What building code applies in Idaho Falls, ID?+
Idaho adopts the IRC statewide, but local jurisdictions enforce it and some rural areas have no inspections. Check whether Idaho Falls has local amendments before you submit.
How much do custom house plans cost in Idaho Falls?+
Plans start at $1,050 for homes up to 1,000 sq ft and are priced by size, with free customization and 30 days of revisions. Engineer stamps for Idaho start at $1,000.
Let's design your Idaho Falls home
It takes about 10 minutes, and we save your answers as you go.